![]() ![]() After you have reinstalled your cabinets and hardware, step back and admire your handiwork! While it is tempting to reinstall your doors and admire your finished product, we recommend waiting until the paint has time to dry fully so you don’t get flaws in the finish. It may take up to two days for paint to fully dry depending on your weather and climate. While you’re waiting for your doors and drawers to dry, work on the cabinet boxes. Keep all surfaces flat while allowing paint to dry for at least two hours, and follow these steps again for a second coat. Paint should be dry to the touch before tackling the back. Apply paint to the center first, finishing with the rails and stiles. Satin, semi-gloss, and gloss are all good options, and will allow for easy cleaning in the future. Your cabinets may need a second round of priming and sanding to achieve a smooth finish.Ĭhoose a high-quality paint with a hard finish for best results. Use a fine grit sanding sponge to make sure trim grooves or door edges haven’t collected any excess paint. After cabinets have had a few hours to fully dry, grab that orbital sander again and give each cabinet a much lighter sanding with a fine-grit sandpaper. While you wait for your primer to dry on the doors and drawers, you can prime the cabinet boxes and avoid downtime. Wait until surfaces are dry to the touch before painting the reverse side. Wipe everything down with a soft rag to remove sanding dust.Ĭhoose an appropriate primer and give your doors and drawers a coat. Check on wood filler repairs and sand those areas to match. Use a sanding sponge to dig into any tough areas that need special attention or corners that are hard to get with your sander. Painted cabinets should get a thorough sanding with 120-grit paper, but no matter the finish, do a final pass with 220-grit. You can sand by hand if you like, but your arms will probably get pretty tired. Grab your orbital sander and some medium grit sandpaper. While you’re cleaning, keep an eye out for any holes or flaws. Use a clean rag and scrub thoroughly with a degreasing cleaner, which will help with pristine paint adhesion later on. If your cabinets need a facelift, chances are they have years of grit, grime, oil, and wax hidden on the surface or clinging to crevices. Once you are organized, all surfaces that will be painted need to be cleaned thoroughly. ![]() Remove hinges and hardware and store them in a bin or a bag nearby so that no small parts are lost. Prepare a work area that will allow doors to lay flat while working. To start, label each cabinet door and drawer before removing so that you can easily reinstall them without it feeling like a puzzle. While it’s tempting to start by cracking open the paint can and pulling out the brushes, preparation is the most important step, but it can also be the most time consuming. Also, tape off the wall around your cabinet and any other surface that should not be painted, like range hoods and backsplashes. No matter how careful you are, accidents still happen, so you should cover your countertops and floor with a drop cloth, a tarp, or masking paper to protect them from paint drips and splatter. Any type of wood (including MDF) will do well, but keep in mind that stained or glossy cabinets should be stripped before jumping in. The smooth surface of laminate resists paint adhesion, so this kitchen upgrade is recommended only for homes with wood cabinets. Most cabinets will do well with the right preparation, but laminate cabinets are the exception to the rule. While it may seem like a breeze, there are a few crucial steps to follow for smooth, long-lasting results. Painting your cabinets tops the list of the fastest and most affordable ways to freshen up your kitchen. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |